[. . . ] 94271 Last update: 06/28/13 05 0-14 Light ENGLISH SAFETY INSTRUCTIONS - PART B • The manufacturer advises the correct use of Luminaires (lighting fixtures)!Therefore always follow these instructions to ensure correct and safe installation and functioning of the luminaire and keep it for future reference. [. . . ] Under this condition, anyone coming in contact with the luminaire is subject to electric shock which could cause injury or death. €¢ Always use wire nuts/connectors rated for the correct gauge and number of wires used. CAUTION: Be certain that no bare wire strands are exposed outside of the wire nuts/ connections (if applicable). €¢ Be careful not to damage or cut the wire insulation (covering) during installation. Doing so will result in increased temperatures and possible risk of re. €¢ Maintain interior lighting with a dry cloth duster, do not use abrasives or solvents. €¢ Always consider all the technical speci cations of the luminaire. Verify the stated icons on the identi cation label on the luminaire and the icons that are shown in part A of your safety instructions. ATTENTION: Below you will find all the explanations with numeric reference to the icons respectively in front of these PART-B safety instructions. Applicable icons to your fixture are shown in PART-A safety instructions. 05- Philips LivingColors/LightStrips is based on ZigBee LightLink, an open standard for wireless communication within the home. All Philips ZigBee LightLink Certified products can be connected with other Philips ZigBee LightLink Certified products. [. . . ] The guarantee is void if the luminaire was not installed following the instructions or repaired or modified. The manufacturer does not accept any liability for damage caused as a result of misuse or wrong application of the luminaire. [. . . ]